Planetary Drive :-These drive are sturdy and compact speed reducers working on simple planetary principle used for high torque requirement, based on modular design, with nominal rated torque value, with various reduction ratios.

1. Torque capacity  -  100 Nm to 10,00,000Nm

2. Reduction Ratio  -   3.48:1 Onwards

3. Power Rating      -   0.18 kw to 200 kw 

4. Mounting Type    -   Foot / Flange /Agitator

Shaft Mounted Reducers :-These reducers are constructed with Helical Gears and the torque arm provision is made to avoid over load failure and can be mounted on the cylindrical shafts or special shafts.

1. Torque capacity  -  3000 Nm to 40,000Nm

2. Reduction Ratio  -  5:1, 13:1, 20:1

3. Power Rating      -  0.37 kw to 351.77 kw.

Worm Planetary Drive :-This is a unique product which gives excellent replacement for Worm Drives. It contents planetary reduction inside the worm wheel. Due to this, it provides output torque rating 2 to 5 times more than the same size or worm drives. Also it gives higher reduction ratios than conventional Worm Drives. I 

1. Torque capacity  -  87 Nm to 5180 Nm

2. Reduction Ratio  -  76.5 to 345

3. Power Rating      -  0.06 kw to 7.47 kw

Creep Drive :- These drives are used for overhead for achieving micro speed. These drives work on the planetary principle with differential drive system, along with thruster brake.

1. Torque capacity  -  50 Nm to 1000Nm

2. Brake Drum Diameter  - 160 mm to 400 m 

3. Power Rating      -  2 kw to 15 kw.

Slew Drive :-These drives are required for mobile equipments such as excavators, cranes, drilling rigs etc. These drives work with simple planetary principle and are flange mounted with integral or separable pinions according to customer requirements and hydraulic brake.

1. Torque capacity  -  500 Nm to 10,000Nm

2. Reduction Ratio  -  12:1 to 1400:1

3. Power Rating      -  0.18 kw to 50 kw.

Differential Drive :-These drive are mainly required in the printing machinery for achieving the required registration. Drive can be used to achieve variable output speed with very low power variable frequency drives. These drives are useful for printing machinery, sugar industries, cement plants, steel plants etc.

1. Torque capacity  -  1000 Nm to 1,10,000Nm
2. Reduction Ratio  -  5:1 Onwards
3. Power Rating      -  0.18 kw to 60 kw.

Helical Geared Motor

Permanent Magnet D.C. Motor

Worm Geared Motors

FHP Geared Motors