|
|
|
MODEL
TDR-100
|
MODEL
SPM-1
|
MODEL
SPD-2
|
|
|
|
|
- Base plate mounting
type - Module.
- Supply : Three
Phase - 415 VAC.
- For 5 HP to 25
HP DC motors.
- In built 'Phase
Fail' & 'Phade Reserve' protection.
- In built 'over
voltage' & 'Tacho Fail' protection.
- Size : (H) 390
mm, (W) 250 mm, (D) 200 mm.
|
- Base plate mounting
type - Module.
- Supply : Single Phase - 220 VAC.
- For 1/2 HP to 3
HP Shunt / PMDC motors..
- Remote On/Off facility.
- Isolated Trip Relay
Contacts.
- Size : (H) 230
mm, (W) 180 mm, (D) 90 mm.
|
- Wall mounting type
- M. S. enclosure..
- Supply : Single
Phase - 220 VAC.
- For 1 HP to 3 HP
Shunt / PMDC motors..
- Size : (H) 350
mm, (W) 190mm, (D) 130 mm.
|
|
MODEL
TDR-96
|
MODEL
TDR-144
|
CONTROL
PANELS
|
|
|
|
|
- Front panel mounting
type - M.S enclosure.
- Supply : Single
Phase 220 VAC.
- For 1/8 HP to 1HP
PMDC motors.
- Remote On/Off facility.
- Min / Max Speed
Setting & Fuses at back.
- Size : (H) 96mm,
(W) 96 mm, (D) 150 mm.
|
- Front panel mounting
type - M.S enclosure.
- Supply : Single
Phase 220 VAC.
- For 1/8 HP to 1HP
PMDC motors.
- With Start - Stop
facility.
- With Digital Speed
indicator.
- Size : (H) 72mm,
(W) 144mm, (D) 150 mm
|
- For 5 HP to 100 HP DC motors.
- Sychronising control panels.
- Winder - Unwinder panels.
- Custom built panels.
|
Permanent
Magnet D.C. Motors & Geared Motors
1) Industrial PMDC Motors
|
| |
PMDC
(Permanent Magnet Direct Current) Motors are ideally suited for
industrial application with high duty cycles.
These DC Motors are offered in standard foot and flange mountings.
Magnetic Motors are extensively required in TENV & TEFC
enclosures depending on their applications. Manoj Industries is one of the top manufacturer of these Shunt DC
motors.
Permanent
Magnet DC Motors Features:
- Externally access for brush
inspection and replacement
- High starting torque.
- Permanently lubricated sealed
ball bearings.
- Class B Insulation ( Class F
is optional )
- Solid Construction
Technical Specification of PMDC Motors
| Power |
0.25
HP to 2 HP |
| Speeds |
1000 RPM to
4000 RPM |
| Voltages |
90 VDC to 180
VDC |
|
2) Powertek Micro Series
Motors
|
|
These
Micro Series Motors from Powertek are available in the power
requirements is small. Micro Series motors are extremely light &
compact and highly efficient.
Special care is taken to keep the noise level low thus find
application in home appliances fans etc.
Range
| Power |
40
Watts to 140 Watts |
| Speeds |
1000
RPM to 5000 RPM |
| Voltages |
12 VDC to 180
VDC |
|
3) Industrial Battery Operated
Motors
|
|
Industrial
Battery Operated Motors are available in operating voltage from 12 V
to 48 V.D.C. They are ideally suited for battery operated
vehicles hydraulic industries.
These battery operated motors are designed for broad duty
cycles. The oversize brush commutator design ensures better
commutation. Such electrical motors are available in geared and
ungeared versions.
Range
| Power |
0.25 HP to
1HP |
| Speeds |
1500 RPM to
4000 RPM |
| Voltages |
12 / 24 / 48.
VDC |
|
|
|
4) PMDC Geared Motors
|
| |
PMDC
Geared Motors are available in various combinations of gearboxes.
These geared motors can be supplied with Inline helical or worm
gearboxes
The gearboxes are extremely rugged in designed, compact with low
noise levels
All the gears are hardened & ground for longer service. Such
geared motors are available in foot or flange mountings. PMDC
geared motor have a TEFC constructions for high duty cycles.
Range
| Power |
40 watts to
1500 watts |
| Speeds |
1 RPM to 500
RPM |
| Voltages |
12 VDC to 180
VDC |
|
|
